环氧自流平耐磨度很高，洁净效果也好，所以，很多客户都喜欢，施工公司做环氧自流平的次数也很多，那么，如何检测环氧自流平是否合格，下面为大家详细的介绍一下环氧自流平的验收标准，希望对大家有用。环氧自流平工程验收标准：

Epoxy self-leveling wear resistance is very high, clean effect is also good, so many customers like, construction companies do epoxy self-leveling a lot of times, then, how to test whether the epoxy self-leveling is qualified, the following is a detailed introduction to the acceptance standards of eptance of epoxy self-leveling, I hope it will be useful to everyone. Acceptance criteria for epoxy self leveling works:

一、自流平地板丰满度。丰满度即是看地面的反光率是否能达到95%，是否够饱满。这个指标在以前是不受到重视的，但是随着社会的进步和人们的要求逐渐提高，这一项指标也渐渐变成了一项基本的技术要求。一般反射率达不到85%的都是不合格的。

First, self leveling floor fullness. Fullness is to see whether the reflection rate of the ground can reach 95%, and whether it is full enough. This index was not taken seriously in the past, but with the progress of society and people's requirements gradually improved, this index has gradually become a basic technical requirements. Less than 85% of the total reflectance is unqualified.

二、自流平地板硬度。为了使地面有足够的耐磨性，许多客户都会要求地坪表面有一定的硬度。为了达到工业的使用要求，我们一般要求地坪的硬度大于2H。但是填料容易下沉的自流平固化后的硬度并不是太高，所以要选填料不易下沉的为佳。

Two. Hardness of self leveling flooring. In order to make the ground have enough wear resistance, many customers will require a certain hardness on the surface of the floor. In order to meet the requirements of industrial use, we generally require that the hardness of the floor is greater than 2H. But the hardness of the self-leveling solidified filler is not too high, so it is better to choose the filler which is not easy to sink.

三、自流平地板面层质量。环氧树脂自流平地坪是一种表面平滑、美观，具有优秀装饰效果的一种地坪，所以在验收的时候，要看清楚地坪表面是否平整、光亮可达镜面效果，且不能含有颗粒等杂物。

Three, self leveling floor surface quality. Epoxy resin self-leveling floor is a kind of surface smooth, beautiful, with excellent decorative effect of a floor, so when acceptance, to see clearly whether the surface of the flat, bright to mirror effect, and can not contain particles and other impurities.