作者：admin 日期：2018-10-24 12:34:22 人气：108
Epoxy floor manufacturers summed up the following construction points for customers to understand and reference: 1. Customers buy materials for self-construction, the best small area of samples before the construction, meet the requirements of large-scale construction; if problems are found in the construction process, you can communicate with the supplier in a timely manner, please give a professional explanation. Decision by decision;
2. In the summer construction, the floor paint dries fast, so it is better to finish the construction of the floor paint mixed with AB agent in half an hour after opening, otherwise the material will solidify; in the winter construction, when the temperature is low, you can add some accelerator in the material, but not too much. But do not add as much as possible, because the ground will be crisp.
3. Because individual products in epoxy floor paint ingredients are inflammable and explosive dangerous goods, so the construction work must be strictly prohibited pyrotechnics;
4. Because floor paint in the construction, there will be volatile gases, so the construction site should pay attention to good ventilation, to avoid poisoning caused by workers inhaling toxic gases;
5. In the construction of dust-free room and basement parking room, it is necessary to do well the phase protection measures, such as protective mask, gas mask, gloves, etc.
6. Epoxy floor paint should not be in contact with water, no matter in the production process or construction process, no water. Otherwise, there will be a separation between floor paint and cement floor in a short time.
7. In the construction of epoxy floor, the dust on the ground needs to be thoroughly polished and cleaned, otherwise it will affect the adhesion of floor paint to cement floor.
8. In the construction of strict accordance with the procedures to the construction, painting the floor paint when each process must be at the beginning of a process after completely volatile drying, can be constructed, otherwise there will be soft skin, stick shoes, blistering phenomenon;
9. When spraying epoxy floor paint, it is found that there are particles or other impurities, should be cleaned up in time, otherwise it will affect the overall surface effect.
10. In the course of construction, it is unavoidable to get the floor paint on the wall or on machinery and equipment, which needs to be eliminated in time, otherwise it is difficult to remove it after it has completely dried up.
11. When spraying epoxy topcoat, pay attention to the speed of application, do not stay too long in one place, otherwise it will affect the surface aesthetics;
12. in construction, we need to use the beautiful tapes on the corner and vertical parts.
13. the construction site temperature should be above 10 degrees. If it is lower than this temperature, it is necessary to stop construction. If customers need to rush to work, they need to turn on air conditioning or sunlight indoors 24 hours to heat up; otherwise, low-temperature construction will appear on the surface of the sticky, dry, whitening phenomenon;
14. after construction, the ground needs to be cleaned up.