作者：admin 日期：2018-12-01 08:37:53 人气：85
In our daily life, the industrial hot stove is an important equipment to provide power, and the correct operation is the necessary factor to ensure the effective operation of the industrial hot stove. So what work should we prepare before operating the industrial hot stove? What related inspections are there? In view of the need for a comprehensive inspection of industrial hot stoves, if it is restarted or newly installed and repaired, it is necessary to carry out a comprehensive inspection of the industrial hot stoves, mainly for the external and internal inspection of the hot stoves. The inspection items include valves, baffles, pot bodies, etc. Safety accessories and instruments, etc. 而工业热风炉的内部受热面积，相关的燃烧系统，以及烟道和承压的部件等都需要进行详细的检查，保证工业热风炉的内部和外部都处于正常的状态，这样操作的过程中，才能保证工业热风炉不会出现故障，并保证其正常的运行。
The internal heating area, combustion system, flue and pressure components of industrial hot blast stove need to be inspected in detail to ensure that the internal and external of industrial hot blast stove are in a normal state. Only in this way can the industrial hot blast stove not fail and ensure its normal operation. That's ok.
In order to prevent the stiffness expansion of industrial hot blast stoves due to high temperature in operation, it is necessary to water them in advance before the start of hot blast stoves, mainly in order to reduce the increase of thermal stress, resulting in rapid expansion and high water level; furthermore, baking is also important to avoid the expansion. The high temperature flue gas leads to deformation, rupture and explosion accidents.
If the heating surface of industrial hot-blast stove is rusted and the oil and dirt on the surface of industrial hot-blast stove are removed, the hot-blast stove can be effectively upgraded in the overall steam quality by boiling stove. After all the inspection work is finished, the hot-blast stove is ignited to ensure that the temperature rises slowly and continuously to promote it. Hot blast stove can be more uniform in heating.
There must be no sudden temperature rise in industrial hot stoves to avoid bursting; there is also a need to warm up the industrial hot stoves, after ignition, because the temperature will continue to rise, to prevent the phenomenon of uneven heating, so it is very necessary to warm up the pipes, to avoid causing industrial hot stoves pipes. Damage to valve and valve.